PRISM0X0

Analog Inputs
– Number of Inputs: None.

Analog Outputs
– Number of Outputs: None.

Mechanical Specifications
– Space Required: Half rack unit WDH: 20.83 cm x 22.86 cm x 4.37 cm / 8.2 in. x 9 in. x 1.72 in. Depth does not include connector allowance. Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.
– Electrical: PoE+ IEEE 802.3at Class 4, 7 Watts minimum to 25.5 Watts maximum. No line voltage switching required.
– Ventilation: Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed 5.08 cm, 2 in minimum clearance. The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
– Certifications or Compliance: Safety: UL 60065, cUL 60065, IEC 60065. EMC: “Class A” device applies to all of the following EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, FCC Part 15, ICES-003. Environmental: RoHS.
– Shipping Weight: 5 lbs. 2.27 kg

System
– Sampling Rate: 48 kHz.
– Processors: 1 x Analog Devices SHARC 21489 @ 400 MHz SIMD.
– Raw Processing Capacity: 400 MIPS, 1.6 GFLOPS.
– Delay Memory: 174 mono seconds.
– RS-485 Serial I/O: 38.4 kbaud default 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port.
– Ethernet Cable: Standard CAT5e or CAT6, maximum device-to-device length = 100 meters.
– Dante Cable: Standard CAT6, maximum device-to-device length = 100 meters.
– ARC Cable: Standard CAT5, distance dependent upon load and number of devices. 8 Watts maximum power available.
Maximum Devices Per System: 80 Units per Site File.
Maximum Stored Presets: 1000.

Architect and Engineer Specifications: Prism 0x0.
The half rack device shall provide network audio processing, mixing, and routing using the Dante™ protocol with a capacity of 128 64×64 channels. The connector shall be 1000 Base-T RJ45 utilizing CAT6 cable.

A designer software application shall be provided that operates on a Windows computer, with network interface installed, running Windows® 7 or higher operating system. Computer connection for configuration shall be via the device’s rear panel Ethernet connector. All internal processing shall be digital DSP. Available DSP components shall include but not be limited to various forms of: mixers, equalizers, filters, crossovers, dynamics/ gain controls, routers, delays, remote controls, meters, generators, and diagnostics.

The front panel shall include a white on black 256×64 pixel OLED display and momentary switch. The display shall indicate unit name, IP address, MAC address, Site File version, and fault messages.

External control shall include dedicated software screens as well as preset selection, level control and muting using the optional ARC wall panel remote controls via industry-standard CAT5 cable with RJ45 connectors. A built-in web server shall provide four instances of ARC-WEB, which allows for user control from nearly any web browser or mobile device. All program memory shall be non-volatile and provide program security should power fail. The device shall provide an on board real time clock to facilitate automatic, timed changing of presets and may sync to NTP. Third-party control systems may interface over IP using a published ASCII control protocol.

Internal processing shall be 32-bit or 40-bit floating point, 48 kHz.

The device shall be powered over Ethernet PoE+ by an IEEE 802.3at Class 4 standard compliant switch, or the included injector. The device can be powered from either the Dante or Ethernet Port . The device shall meet UL/CSA and CE safety requirements and comply with CE and FCC Part 15 emissions limits. The device shall be RoHS compliant. The chassis shall be constructed of cold rolled steel, and may be surface mounted or mount into a standard 19” 1U EIA rack using an available bracket or rack tray. The device shall be a Symetrix Prism 0x0.